Aquamaster 346 -gb

Multiparametric analyser Aquamaster 346

Multiparametric analyser specifically designed for on site measurements of all the most important chemical and physical parameters useful to characterize the quality of water.
The system is suitable to measure in fresh water (rivers and lakes), salt water, wells and clarified wastewater.
The complete measuring system includes the multiparametric probe, (Mod.346/P - complete version that can include sensors of pH, ORP, ISE, Conductivity, Turbidity, Dissolved Oxygen, Pressure, Temperature and the stirrer - or Mod.346/PS simplified version that can include sensors of pH, ORP, Conductivity, Dissolved Oxygen, Pressure, Temperature and the stirrer) the cable with sealed connectors, the instrument Mod.346/SU (datalogger c/w data transmission system via RS232 serial interface or via radio or via Modem GSM) or the instrument Mod.346/IU (pc interface c/w RS232 serial link or Modbus); PC or PLS (these last two are to be supplied by the customer).
The multiparametric probe is available in two different versions: Mod.346/P is the complete version and can include sensors for pH, ORP, ISE, conductivity, turbidity, dissolved oxygen, pressure, temperature and the stirring motor; Mod.346/PS is the simplified version and can include sensors for pH, ORP, conductivity, dissolved oxygen, temperature, pressure and the stirring motor.
The stirring motor is required when the probe is intended to measure in still water or when the probe includes the dissolved oxygen sensor and the sample water flow on the sensor is lower than 0,5 cm/sec.
The multiparametric probe Mod.346/P- in both versions is made of a stainless steel cylinder, AISI 316, housing all sensors, cells and electrodes with the related electronic circuits.
All signals are amplified, scaled and converted in digital form locally, inside the probe.
All electrodes and cells requiring frequent substitution and service, are easily removable without necessity of dismounting the probe body.
All calibration data are stored inside the probe so that different probes can be connected to the same Surface Unit. The Surface Unit Mod.346/SU can be connected to different probes without the need to perform any calibration or other configurations, and it automatically recognizes the probe arrangement.
Data transmission within probe and surface unit is operated via RS 485.
The electric connection cable is internally reinforced with a Kevlar core and can also act as a supporting rope. A submarine multipolar connector allows connecting the probe to the cable. The cable connector can optionally be connected to a stainless steel rope for probe lifting.
Aquamaster 346 can mesasure the following parameters: pH, ORP, ISE Conductivity, Dissolved Oxygen, Salinity, Surface Temperature and Temperature in depth, Barometric pressure, Depth and Turbidity.